Instruction Manual

Operation
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
4-40
Menu Structure
4. For IPv4 Network or IPv6 Network, press Enter and then use Previous or Next to
access the network addresses and configuration.
Configuration
To access the Configuration menu:
1. From the Home screen, press Previous or Next until the screen displays
Configuration. Press Enter to select.
2. Press Previous or Next until the screen displays your selected function. Press
Enter to select.
Changing the Administrator Password (Configuration > Change Admin
Password)
Use Change Admin Password to set or change the administrator password. Once the
administrator password is set, you must know the administrator password or the
service password to change the administrator password. Passwords consist of exactly
eight numbers each between the values of 0 and 9.
Screens that require a password prompt for the password before allowing access to
the restricted areas. Once entered, the administrator password does not have to be
entered a second time unless there is no user activity for five minutes. Enter the
administrator password if you are prompted to do so.
To change the administrator password:
1. From the Home screen, press Previous or Next until the screen displays
Configuration. Press Enter to select.
2. Press Previous or Next until the screen displays Change Admin Password.
Press Enter to select.
3. The first number is flashing. Press Previous or Next to change the value of the
flashing number. When the flashing number shows the desired value, press Enter
to select.
4. The screen displays the second number flashing. Repeat Step 3 until you have
entered all eight characters. Press Enter to select. After the last number has been
entered, the password has been set to the new password.
Setting the Number of Reserved slots (Configuration > Set Reserved Slot
Count)
Reserved slots can be accessed by the operator control panel (OCP). For example,
you might keep a cleaning cartridge in a reserved slot if your backup software does not
Note. If you forget the administrator password, you cannot enter a new password. You must
call your customer service representative.