Instruction Manual

Operation
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
4-39
Menu Structure
!
The WWide Port Name and Port Type for Port B.
World Wide names are assigned automatically; they cannot be configured.
Component Status (Status/Information > Component Status)
To obtain component status:
1. From the Home screen, press Previous or Next until the screen displays
Status/Information. Press Enter to select.
2. Press Previous or Next until the screen displays Component Status. Press Enter
to select.
3. By using Previous or Next, you can select from the following information screens:
!
Drive activity
!
Library status
!
Drives status
!
Fan status
The second line of the screen will display one of the following:
!
Good — the component is operating normally.
!
Warning — the component might have an issue that should be addressed. The
device is functional.
!
Critical — the component has an error condition that should be addressed. The
device may not be fully functional.
!
Failed — the component has a known failure and should be replaced.
Network Information (Status/Information > Network Information)
To access network settings for the device:
1. From the Home screen, press Previous or Next until the screen displays
Status/Information. Press Enter to select.
2. Press Previous or Next until the screen displays Network Information. Press
Enter to select.
3. Press Previous or Next to access the following information:
!
IPv4 Network Enabled or Disabled
!
IPv6 Network Enabled or Disabled
!
Host Name
!
Domain Name
!
MAC Address