Instruction Manual

Operation
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
4-36
Menu Structure
Entering the Administrator Password
The administrator password accesses all of the available functionality, except for the
Service Area. A user without the administrator password has access to the
Status/Information menus.
Options that require a password will prompt for a password before allowing access to
the restricted screens. Once entered, the administrator password does not need to be
entered again unless there is no user activity for five minutes or the password lock is
enabled.
The number 1 should be flashing. To enter the password, do the following:
1. From the operator control panel, press Next to scroll to the first number of the
password.
2. Press Enter. The number you selected is replaced with an asterisk (*), and the
cursor proceeds to the next text box.
3. Repeat steps 1 and 2 until you have entered all eight numbers. After the last
number has been entered, the screen continues to the restricted area.
Status/Information
To access the Status/Information menu:
1. From the Home screen, press Previous or Next until the screen displays
Status/Information. Press Enter to select.
2. Press Previous or Next until the screen displays your selected function. Press
Enter to select.
Inventory (Status/Information > Inventory)
This option provides information on which slots have cartridges and which are empty.
The second line on the screen displays one of:
!
Full (tapes without bar code labels)
!
Bar code identification from the tape
!
Empty
The device has the following inventory locations:
!
Left magazine
!
Right magazine
!
Drive 1
Tip. By default, the administrator password is unset; all of the digits are null. You must set the
administrator password from the OCP to protect the administrator functions on the OCP and
enable the administrator functions in the RMI.