Instruction Manual

Operation

M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001

4-32

ACL Home Screen

The first line of the Home screen displays the device's product name. The second line

displays a brief status message.

Figure 4-29. Operator Control Panel LEDs

Table 4-1. Operator Control Panel LEDs

1. Green Ready. Illuminated when power is on. Blinking when there is tape drive or

robotics activity.

2. Amber Clean. Illuminated when the tape drive has determined that a cleaning

cartridge should be used. Cleaning is only necessary when the device directs

you to do so. Additional cleaning is not necessary.

3. Amber Attention. Illuminated if the device has detected a condition that requires

attention by the operator.

4. Red Error. Illuminated if an unrecoverable error occurs. A corresponding error

message displays on the LCD screen.

Table 4-2. Drive status

Status Definition

IDLE Drive has a tape inserted, but there is no activity

RDY Drive has no tape

RD Drive is reading

FWD Drive is forwarding

WR Drive is writing

LD Drive is loading a tape

ULD Drive is unloading a tape

CLN Drive is cleaning

1 2 3 4