Instruction Manual

Operation
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
4-30
Support
Viewing Logs
From the Support: Library Logs page you can see the device logs. The available logs
are: Error Trace, Informational Trace, Warning Trace, Configuration Change Trace, and
Standard Trace.
The log entries are displayed in order of most recent to oldest. The format for the log
entries is: YY.MM.DD HH.MM.SS.ss LIB/ERR<80 89 62 40
!
YY.MM.DD — the date displayed as Year.Month.Day
!
HH.MM.SS.ss — the time displayed as Hour.Minute.Second.Hundredths of a
second
!
First code — hard or soft error. The code after LIB/ERR (80 in the example) will be
80 or 40. 80 indicates a hard error, 40 indicates a soft error.
!
Second code — the main error code, see Error Codes on page 5-11 for a list of
error codes and recovery procedures.
!
Third code — the sub-code, see Error Sub-Code Descriptions on page 5-23 for a
list of sub-codes.
!
Fourth code — sub-code-specific information for factory use only
Cleaning Tape Drives
Use the Support: Clean Drive page to clean the tape drives.
!
Slot # — select the slot number of the cleaning tape
!
Drive — select the drive to be cleaned
Figure 4-26. Support: Library Logs Page