Instruction Manual

Operation
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
4-23
Configuration
Setting Event Notification Parameters
The Configuration: Alerts page lets you configure e-mail notification of device events.
You may change the:
!
Notification Level — the types of events for which the device should send e-mail
!
To Email Address — the address to which to send the reported events (e.g.
[e-mail]). Only one email address can be configured.
!
Email Domain — domain of the return e-mail address (e.g. example.com)
!
SMTP Server Address — IP address of the SMTP server
Saving and Restoring the Device Configuration and
Restoring Factory Defaults
Use the Configuration: Restore defaults page to restore the factory defaults, reset the
administrator password to null, or save the device configuration database to a file. The
device will perform an inventory after the defaults are restored.
The saved configuration database will make it easier to recover the device
configuration if you need to replace the chassis or library controller. This feature is also
useful when installing multiple devices. Either save the configuration before configuring
Figure 4-17. Configuration: Alerts Page
IMPORTANT: Once you reset the administrator password to null, you will not be able to access
the administrator functions in the RMI until you set an administrator password through the
OCP.