Instruction Manual

Operation
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
4-21
Configuration
!
SNMP Trap Notification Filter — the types of events for which the device should
send SNMP traps.
Changing the Administrator Password
Use the Configuration: Password page to change the administrator password for the
RMI and OCP.
The password is exactly eight numbers, each between 0 and 9.
Setting the Date and Time
Use the Configuration: Date/Time page to set the date and time. The time is based on
a 24–hour clock, where 1:00 pm is 13:00.
Note. You must set the administrator password with the OCP before you can access
administrator functionality in the RMI.
Figure 4-14. Configuration: Password Page
Note. The device does not adjust its time to daylight saving time; the time must be adjusted
manually.