Instruction Manual

Operation
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
4-18
Configuration
Changing the Network Configuration
Use the Configuration: Network page to modify the current network configuration.
When you request a change, a pop-up box will ask you to confirm the changes.
You may change the:
!
Protocol version — selects the Internet Protocols that will be enabled. Select IPv4
only, IPv6 only, or both IPv4 and IPv6 protocols. The default is the IPv4 protocol
only.
!
Host Name — enter the host name provided by your network administrator for the
Library.
!
Domain name — enter the domain name provided by your network administrator
for the Library.
Figure 4-12. Configuration: Network Page