Instruction Manual

Operation
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
4-8
Identity
You can see, but not modify:
!
MAC Address — a unique identifier for the library controller network interface
!
Full Qualified Domain Name — the fully qualified domain name for the device
When IPv4 Addressing is Enabled, you can see, but not modify:
!
IPv4 DNS Server 1 and IPv4 DNS Server 2 — addresses of the configured DNS
servers used when DHCP Addressing is not Enabled.
!
DHCPv4 Addressing — When Enabled, the device will request an IP address from
a DHCP server each time the device is booted.
!
IPv4 Address — the Library network address
!
Subnet Mask — The network mask of the library controller used when DHCP
Addressing is not Enabled.
!
Default Gateway — the gateway used when DHCP Addressing is not Enabled.
When IPv6 Addressing is Enabled, you can see, but not modify:
!
Stateless Addressing — when Enabled, the device will generate an address for
itself based on the routing information obtained from a router advertisement and
Figure 4-6. Identity: Network Page