Instruction Manual

Operation
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
4-2
Status Pane
used with the RMI. If the administrator password is lost, contact customer service
to generate a temporary password that will grant administrator access.
!
Service — access to this level is by Service personnel only. The service password
is set at the factory. The same service password is used for the RMI and OCP.
The user login provides access to the Identity and Status options, but not the
Configuration, Operations, and Support options. Administrator level provides access to
all screens except for the Log configuration and Service screens.
Status Pane
The System Status pane (see Figure 4-2) shows the current device and drive status.
The System Status pane displays the following:
!
Updated — the day, date, and time of the most recent status view. This timestamp
comes from your computer and may be different from the Library Time at the
bottom of the pane. Click your browser's reload button to refresh the system status.
!
Status of the Library and tape drives
TIP. By default, the administrator password is unset; all of the digits are null. You must set the
administrator password from the OCP to protect the administrator functions on the OCP and
enable the administrator functions in the RMI.
Figure 4-2. System Status Pane
The green Status Ok icon indicates that the device is
fully operational and that no user intervention is
required.
The blue exclamation point Status Warning icon
indicates that user attentions necessary, but that the
device can still perform most operations.
The red X Status Error icon indicates that user
intervention is required and that the device is not
capable of performing some operations.