Instruction Manual
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
4-1
4 Operation
This section includes:
Remote Management Interface (RMI)
Overview
The remote management interface (RMI) lets you monitor and control your device
through the World Wide Web (WWW). The RMI hosts a dedicated, protected Internet
site that displays a graphical representation of your device.
Before using the RMI, you must configure the device network settings and set the
administrator password with the OCP.
To start the RMI, open any HTML browser and enter the IP address of the device in the
browser's address bar.
Login
To login, select the Account Type, enter a password if required, and then click Sign
In.
The Account Types are:
!
User — no password is required (leave the password box blank).
!
Administrator — the administrator password is required. The same administrator
password is used for the RMI and OCP. There is not a default administrator
password; the administrator password must be set with the OCP before it can be
Remote Management Interface (RMI) 4-1
Operator Control Panel (OCP) 4-31
LTO Cartridge Media 4-47
Figure 4-1. RMI Login Page