Instruction Manual

Installing and Configuring the ACL Tape Drive for
the NonStop NS-Series Server
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
2-6
Installation
3. Attach the power cord to the ACL tape drive’s AC power receptacle. See
Figure 2-5. Then plug the other end into an AC power outlet.
Note. The tape drive does not have protection against lightning surges. Customers in high-risk
areas should use external surge protection rated for use in their location and be able to handle
the power demand of the tape drive.
Figure 2-5. AC Power Connection