Instruction Manual

Overview and Features
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
1-3
Front Panel Overview
The operator control panel includes four LEDs that indicate system status information
as shown in Figure 1-2.
Figure 1-2. Operator Control Panel LEDs
Table 1-3. Operator Control Panel LEDs
1. Green Ready. Illuminated when power is on. Blinking when there is tape drive or
robotics activity.
2. Amber Clean. Illuminated when the tape drive has determined that a cleaning
cartridge should be used. Cleaning is only necessary when the device directs
you to do so. Additional cleaning is not necessary.
3. Amber Attention. Illuminated if the device has detected a condition that requires
attention by the operator.
4. Red Error. Illuminated if an unrecoverable error occurs. A corresponding error
message displays on the LCD screen.
1 2 3 4