Instruction Manual

Troubleshooting
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
5-28
Warning Events
83 Media attention
!
Verify that the cartridge and tape drive
generation are compatible.
!
Inspect the cartridge for damage.
!
Ensure that the cartridge has not
exceeded its usage life.
!
Retry the operation.
84 Tape drive tape alert; tape
drive reported a warning or
critical tape alert.
!
Verify that the cartridge and tape drive
generation are compatible.
!
Inspect the cartridge for damage.
!
Ensure that the cartridge has not
exceeded its usage life.
!
Retry the operation.
85 DHCP request has failed
!
Check the network to ensure connection
to the DHCP server.
!
Ensure that the DHCP server is
operating correctly.
!
Configure a static network address if the
DHCP server is inoperable or not
present.
86 Autoclean media warning;
not enough media present
to support autocleaning.
Ensure that cleaning cartridges with valid
cleaning cartridge barcode labels are
available in the Library.
87 Drive not supported; the
tape drive was disabled
because it cannot be used
in this Library.
Ensure that the tape drive is the correct type
and has the correct firmware.
88 Drive firmware revision has
not changed after a tape
drive firmware upgrade.
!
Verify the firmware revision of the tape
drive firmware file used for the upgrade.
!
Retry the upgrade with a different
revision of the tape drive firmware.
!
If this event continues, contact customer
support.
89 Power supply fan has
failed. Redundancy may be
at risk.
!
Verify that the indicated fan is
operational and not obstructed.
!
Verify that the ambient temperature does
not exceed environmental specifications.
!
If this event continues, contact customer
support.
Table 5-6. Warning Event Codes
Event Code Description Details and Solution