Instruction Manual

Troubleshooting
M8701A / M8702A ACL Tape Library Installation and User’s Guide—694636-001
5-25
Error Sub-Code Descriptions
Device Error Sub-Codes
91 Elevator movement to home position failed
92 Error during sled movement to rotation position
93 Error during rotation to home or far position
94 Sled movement to home sensor position failed
95 Sled movement to transport position failed
A1 Sled movement to sensor failed
A2 Sled movement to rotation4 position failed
A3 Elevator movement to home position failed
A4 Error during rotation to far position
B0 EEPROM on robotics controller not accessible or error during read/write
operation
C0 Check on magazine type failed
C1 Rotation movement during check on magazine type failed
C2 Elevator movement during check on magazine type failed
C3 Sled movement during check on magazine type failed
C4 Sled movement to sensor during check on magazine type failed
Table 5-4. Device Error Sub-Codes
Error Code Description
81 Drive wake up failed
88 Error accessing slot status
90 Robotic load not reached Cartridge Present sensor
91 No activity after Load command
92 Time-out while loading tape
93 No activity after load command
94 Time-out drive Unload
95 Drive terminated unsuccessfully
96 Tape not ejected at robot unload
97 Slot not free at robot unload
Table 5-3. Robotic Error Sub-Codes
Sub-Code Description