Owner manual

Function Key Commands
ViewSys User’s Guide—526358-002
4-2
Unnumbered Function Keys
NEXT PAGE Toggles ROTATION. Pressing this function key toggles the state
between ON and OFF. ROTATION ON causes the utility to
sequentially display all screens. ROTATION OFF repeatedly displays
the currently selected screen.
Shift NEXT
PAGE
Toggles TIERS between 1 and 2 tiers. Whenever 2, 3, or 4 processors
are being displayed and TIERS is set to 1, the processors appear in
vertical columns, side by side. When 2, 3, or 4 processors are
displayed and TIERS is set to 2, the upper half of the screen displays
half the processors, and the bottom half displays the remaining
processors. TIERS 2 yields fewer entities per processor in the display,
but the bar graph is longer, giving finer resolution to the percentage
used.
PREV PAGE Selects next CPUSET. When there is more than one CPUSET, and
the setting for ROTATECPUS is OFF, this function key causes the
next CPUSET to be selected and displayed continuously.
Shift PREV
PAGE
Toggles ROTATECPUS between ON and OFF. This command is
operational only after the ROLL UP function key is pressed to select
the all processors display.
INS LINE Resets the maximum value counters. With each new sample period,
these counters are set to the maximum of their current contents, or
the current poll period value.
DEL LINE Exits the program.
Table 4-2. Unnumbered Function Keys
Function Key Function
ROLL UP or Alt-Up Arrow Displays all measured processors
Shift ROLL UP, BREAK, or Control-Scroll Lock Displays HELP information
ROLL DOWN or Alt-Down Arrow Displays Maximum use statistics
Shift ROLL DOWN or Alt-Shift-Down Arrow Displays Current use statistics
NEXT PAGE or Alt-Pg Down Toggles rotation
Shift NEXT PAGE or Alt-Pg Down Toggles tiers
PREV PAGE or Alt-Pg Up Selects next CPU set
Shift PREV PAGE or Alt-Pg Up Toggles ROTATECPUS
INS LINE or Control-Ins Reset maximums
DEL LINE or Control-Del Exit