Owner manual

ViewSys Run Command Syntax
ViewSys User’s Guide—526358-002
3-4
ERRORPROMPT Command
Example
VIEWSYS DISPLAY CPUBUSY
ERRORPROMPT Command
Use the ERRORPROMPT command to specify if ViewSys outputs a continuation
prompt when errors are generated during the ViewSys definition language compiler
phase. If you omit this command, the ERRORPROMPT default is set to ON.
ON
indicates that a continuation prompt appears on the ViewSys terminal.
OFF
indicates that no continuation prompt appears and ViewSys will run using internal
maximum default values for the ViewSys metrics.
Example
VIEWSYS ERRORPROMPT OFF
MEMQUEUE CPU3
DISPATCH CPU4
SENDBUSY CPU5
CACHEHITS CPU6
DISCIO CPU7
PCB CPU8
LOCKEDMEM CPU9
SYSPOOL CPU10
MAPPOOL CPU11
LCB CPU12
TLE CPU13
BPT CPU14
(Not applicable) CPU15
Note. You can alter the display type interactively. Function keys 1 through 16 select
individual entity displays, and shifted function keys 1 through 16 select individual
processor displays.
ERRORPROMPT { ON | OFF }
Entity Display Processor Display