Manual

Specifications
SL500 (M852x) Tape Library Installation and User’s Guide—541531-005
A-5
Power Cords and Receptacles
Installing the Power Cords
•
If your rack has a power distribution unit (PDU:
°
Plug each power cable from the power supply receptacle to the PDU.
°
Then plug the PDU cable into the wall receptacle.
•
If your rack does not have a PDU, plug each power cable from the power supply
receptacle into the wall receptacle.
WARNING. Possible bodily harm and equipment damage: The power cord must not be
plugged in until the power supply has been properly installed.