Manual
Building FaultHandling on Windows
To build FaultHandling on your Windows system, complete the following steps:
1. Go to the <Axis2 Home>\samples\faulthandling directory on your Windows system,
using the command:
command prompt> cd <Axis2 Home>\samples\faulthandling
For example:
command prompt> cd C:\axis2-1.4.1-bin\samples\faulthandling
2. Generate the service. To do so, complete the following steps:
a. Clean the output directory (if already present) using the command:
command prompt> ant clean
b. Create the service archive file (BankService.aar) in the <Axis2
Home>\samples\faulthandling\build\service directory on your Windows
system, using the command:
command prompt> ant generate.service
FaultHandling is now ready to be deployed under Axis2/Java web application on NonStop
system.
Deploying FaultHandling on NonStop
To deploy the BankService webservice under Axis2/Java web application, complete the following
steps:
1. Copy the BankService.aar file from the <Axis2
Home>\samples\faulthandling\build\service directory on Windows system to
the <NSJSP deployment directory>/webapps/axis2/WEB-INF/services OSS
directory on your NonStop system.
2. Verify if the BankService is successfully deployed:
• If iTP WebServer is already running, BankService should be listed in http://<IP Address
of the iTP WebServer>:<port#>/servlet_jsp/axis2/services/listServices
• If iTP WebServer is not running, start the iTP WebServer using the following steps:
a. Go to <iTP WebServer deployment directory>/conf, using the command:
OSS> cd <iTP WebServer deployment directory>/conf
For example:
OSS> cd /home/sash_usr/webserver/conf
b. Start the iTP WebServer using the command:
OSS> ./start
The BankService should be listed in http://<IP Address of the iTP
WebServer>:<port#>/servlet_jsp/axis2/services/listServices .
Running FaultHandling
To run FaultHandling, the BankService webservice on your NonStop system must be invoked
through a client on your Windows system. To do so, perform the following steps:
1. Go to <Axis2 Home>\samples\faulthandling, using the command:
command prompt> cd <Axis2 Home>\samples\faulthandling
For example:
Deploying and Running Axis2/Java Sample Applications on NonStop 185