Manual

1. Click the /servlet_jsp/axis2 path under Applications in the NSJSP Web Application Manager
screen.
NOTE: If you do not have access to the NSJSP Web Application Manager screen, you can
run Axis2/Java on your NonStop system by completing the following steps:
a. Go to the <iTP WebServer deployment directory>/conf directory using the
command:
OSS> cd <iTP WebServer deployment directory>/conf
For example:
OSS> cd /home/sash_usr/webserver/conf
b. Start your iTP WebServer using the command:
OSS> ./start
c. Access the Axis2/Java application using the address:
http://<IP Address of the iTP WebServer>:<port#>/servlet_jsp/axis2
The Axis2/Java Home Page appears.
Figure 7-3 shows the Axis2/Java Home Page.
Figure 7-3 Axis2/Java Home Page
2. Click Validate to verify if Axis2/Java has been successfully deployed on your NonStop
system. The Axis2/Java deployment is successful if:
No error or warning is reported.
The core axis2 libraries are present message is displayed in the Essential
Components section.
Found Axis2 default Version service and Axis2 is working properly
message is displayed in the Examining Version Service section.
Figure 7-4 shows the Axis2/Java Validate screen.
Installing Axis2/Java on NonStop 183