Manual

Figure 5-25 Project Explorer View
At this point, you can either deploy and verify the EmpInfo application you have developed so
far on your NonStop system, or you can proceed to the Enabling EmpInfo to Delete and Retrieve
Employee Details section.
NOTE: The code for the EmpInfo application developed so far is present in <My SASH
Home>\spring\getting-started\EmpInfo-InParts\Part-6
To verify your EmpInfo application developed so far, complete the following steps:
1. Deploy the application using the steps described in “Deploying EmpInfo on NonStop”
section.
2. Verify your application by accessing the following URL:
http://<IP Address of the iTP WebServer>:<port#>/servlet_jsp/EmpInfo/insert.htm
You can now access the application at http://<IP Address of the Webserver>:<port#>/
servlet_jsp/Empinfo
Figure 5-26 shows the EmpInfo: Insert Employee screen.
Overview of EmpInfo 129