User Manual

Interfacing With the Open SCSI I/O Process (IOP)
Open SCSI for Fibre Channel Controller Integrator’s Manual for HP Integrity NonStop NS-Series Servers—
3-17
File-System (FESTATUS) Error-Code Values
32 FENOPOOLSPACE Check for one of these causes:
•
The IOP encountered an error in allocating a
needed memory segment.
•
A memory pool was not set up correctly.
•
The IOP could not initialize some control structures.
33 FENOIOBUFSPACE Check for one of these causes:
•
The IOP could not obtain access to buffer memory.
•
Buffer memory could not be locked.
35 FENOIOCBSPACE Check for one of these causes:
•
Could not obtain access to IOP control-block
memory.
•
IOP control-block memory could not be locked.
66 FEDEVDOWN An operation was attempted on a device that is down.
104 FENORESPONSE This error code is returned if the controller or device is
not responding to an I/O operation.
120 FEDATAPARITY A data transfer caused a parity error.
136 FEUNITOWN The operation finished with a status that indicates an
ownership problem with the controller. The IOP should
normally correct this problem and retry the operation. If
this error code is returned, there might be an error with
the controller.
156 FEIOPROTOCOLERR A SCSI protocol error occurred during an attempt to
communicate with a device.
157 FEIOPROCERR The IOP detected an internal error or inconsistency.
160 FEINVALIDSTATE SCF attempted to stop an IOP that is kept open while
handling another process.
179 FEBADFORMAT Check for one of these causes:
•
The format of the WRITEREAD buffer header block
is incorrect.
•
The format of the CCB is incorrect.
190 FEDEVERR This is a generic, catch-all error code used when there
is a problem communicating with the device and the IOP
cannot return a more specific error status.
193 FENOMICROCODE The controller detected invalid microcode when it was
started. The controller is not operational and should be
reloaded.
Table 3-6. File-System Error Codes and Their Meanings (page 2 of 3)
Error
Code
Corresponding
FESTATUS Literal
Meaning or Error Cause