User guide

N1525A ACL Installation and User’s Guide—527339-003
A-1
A Troubleshooting
Fault Screen
When a fault is detected, a screen similar to the one in Figure A-1 appears. At
the same time, either the Drive Fault or the Loader Fault LED is lit.
The first line in the Fault Screen shows a numerical Fault Symptom Code (FSC).
The second line shows a brief description of the error in place of the words
'Error Description.' The third and fourth lines will contain a one- or two-line
message describing the initial Error Recovery Procedure (ERP).
Displaying Error Logs
To display the error history of the tape drive, use the Show History menu:
1. At the Default screen, press Enter to enter the Menu mode. The Main menu
appears.
Figure A-1. Fault Screen