User guide

Installing and Configuring the Tape Drive for the HP
Integrity NonStop NS-Series Server
N1525A ACL Installation and User’s Guide—527339-003
5-5
Installation
5. Connect the larger end of the SCSI cable to SCSI port 1 on the rear panel of the
tape drive. See Figure 5-6 for the location.
6. Tighten the screws by hand to secure the cable to the unit. Do not use a
screwdriver.
7. Connect the supplied differential terminator to SCSI port 2. See Figure 5-6 for the
location.
Figure 5-5. Tape Drive Front View
Figure 5-6. Rear View of the Tape Drive
Power Switch
Port 1 Port 2 AC Power Receptacle