User guide

Operating the Tape Drive
N1525A ACL Installation and User’s Guide—527339-003
3-23
When you press Enter, the screen shown in Figure 3-13 appears.
An underlined cursor appears under the first digit. To set the first digit, press the
the up or down scroll button until the desired code number appears. To move
the cursor to the second digit, press Enter. Repeat the process for each of the
four digits. Remember to copy the 4-digit number. You will need it to enter the
Menu mode. An unlock code of 0000 disables control panel locking.
Figure 3-13. Code Select Menu