User guide

Operating the Tape Drive
N1525A ACL Installation and User’s Guide527339-003
3-9
Buttons
The screen's second line displays possible status conditions of the library
robotics:
Loader Idle
Fetch
Stow
Diag Active
Diag Complete
Taking Inventory
Elevator Home
Checking Drive(s)
Orphaned Cartridge
Trapped Cartridge
Scanning Labels.
The third line in Figure 3-4
on page 3-7 represents a map of the tape magazine.
An 11-slot tape magazine is shown. The number 1 shows the location of slot 1
(the front slot) in the map. The number 11 shows the location of slot 11 (the rear
slot) in the map. A rectangle on this line indicates that a cartridge is present in
the corresponding slot of the tape magazine. An underline means no cartridge is
present.