User guide

Installing and Configuring the Tape Drive
N1525A ACL Installation and User’s Guide—527339-003
2-7
Setting the SCSI ID
6. With the
cursor next to line 3, press Enter. The cursor moves to line 4, the up
arrow appears at the end of line 1, and the down arrow appears at the end of
line 4. On line 4, scroll to display more options. Scroll so that line 5 appears.
Then press Enter to save the new selection. An * appears at the left of line 5
to indicate that it is the current selection.
7. Press Escape repeatedly until the menu in Figure 2-4
reappears.
8. Repeat Steps 1 through 7 for each configuration option that you need to
change.
Figure 2-7. Set SCSI Menu Scrolled