User guide

Error Recovery Procedures and Fault Symptom
Codes
N1525A ACL Installation and User’s Guide—527339-003
C-11
Menu Error Codes
5014 LTO Already Loaded User has chosen the Clean Drive menu selection,
but a LTO previously determined to be unloaded
and now selected to be cleaned, has indicated the
presence of a tape cartridge.
D, 1, 5
5015 Expired Clean'g Cart User has chosen the Clean Drive menu selection,
but has specified a slot which contains an expired
cleaning cartridge.
D, 5, 8
5016 Not a Clean'g Cart User has chosen the Clean Drive menu selection,
but has specified a slot which does not contain a
cleaning cartridge.
D, 5, 8
5017 No Slots Installed The Clean Drive menu is selected with no
magazine installed.
D, 5
5020 All LTOs/Slots Empty User has chosen the Map Info menu selection,
but all drive and slot locations are currently devoid
of tape cartridges.
D, 5
5021 Bad Cartridge Map D, 1
5030 Bad Novram Setting A setting restored from Novram, which
successfully passed the Novram checksum
verification performed at power-up, nevertheless
was determined to be invalid.
D, 1
5031 Bad Calendar Setting A time or date setting obtained from the Real
Time Clock, which was indicated as being
"running", nevertheless was determined to be
invalid.
D, 1
5032 Bad Setting A default setting was determined to be invalid. D, 1
5033 Set Density Failed User has chosen the LTO Density menu selection,
but the chosen LTO has failed to successfully
execute the density change request.
D, 3
5034 Set Compression Failed User has chosen the LTO Compression menu
selection, but the chosen LTO has failed to
successfully execute the compression mode
change request.
D, 3
5035 LTO Timeout Error Drive communication error during a menu
operation.
D, 3
5036 LTO Timeout Error Drive communication error during a menu
operation.
D, 3
5037 LTO Set Bus ID Error Error returned from drive when trying to set a
SCSI ID with the configure menu.
D, 3
5038 SCSI Lock Overrides Display message only if an attempt is made to
remove a magazine while a Prevent Medium
removal is in effect.
D, 5
FSC Message Description ERP