User guide

Error Recovery Procedures and Fault Symptom

Codes

N1525A ACL Installation and User’s Guide—527339-003

C-2

Error Recovery Procedures

The following table list the Error Recovery Procedures (ERP) for the N1524A / N1525A

ACL tape drive:

Fault Symptom Codes

The following subsections list Fault Symptom Codes (FSC) for the N1524A / N1525A

ACL tape drive.

ERP Description

A Press ENTER to Reboot

B Power Down to Clear

C Press ENTER to Init. Novram to Def. Cfg

D Press ENTER to Clear

E Press ENTER to Flash

1 Library Control Board

2 Shuttle/Picker Assembly

3LTO Drive

4 Pass-Thru, Motor Cable

5 Operator / Program

6 Check Configuration

7 Magazine / Magazine Sensor

8 Cartridge

9 Door Lever

12 Operator Display Panel

13 Barcode Reader

15 Door Motor

17 Check for valid configuration (no conflicts of SCSI ID's), host

SCSI cables (including overall length), host SCSI adapter and

termination.

# Use Load/Unload Menu or Cartridge Cycle under the

Maintenance / Diagnostic Menu to visually verify the problem.