Manual

Operating the Tape Drive
5158ACL Tape Drive Installation and User’s Guide—524955-002
3-25
Loading and Unloading Tape Cartridges
When you press Enter, the screen shown in Figure 3-28 appears. If the source
were a slot, “Load” would appear in place of “Unload” on line 4.
When the load or unload operation is finished, the Default screen reappears. In
Figure 3-29
, the screen has been updated to show that there is now no tape
cartridge in DLT1, and slot 4 is full.
Figure 3-28. Load/Unload In Progress Screen
Figure 3-29. Updated Default Screen