Manual

5158ACL Tape Drive Installation and User’s Guide—524955-002
2-1
2
Installing and Configuring the Tape
Drive
This section includes the following main topics and sections:
Prepare for the Installation
To prepare for the installation of the tape drive:
Installation Setup
The steps for installation setup are:
Site Setup
Place the tape drive on a flat, sturdy, level surface such as a desk or tabletop.
Leave at least two inches of clearance behind it to allow free flow of cooling air
from the fan.
Prepare for the Installation 2-1
Configuring the Tape Drive 2-3
Connecting the Cables 2-5
Setting Up Reserved Slots 2-8
Configuring Other Options 2-9
Installing the Rear Cover 2-13
Step Action
1 Unpack and check the shipment.
2 Choose a location for the tape drive.