Specifications

3. Remove the mezzanine card.
Replacing a mezzanine card
See “Installing mezzanine cards” (page 36).
Removing and replacing the ICH mezzanine board
One ICH mezzanine board is required per system. The ICH is required in the BL860c i2. In the
BL870 i2 and BL890 i2, the ICH mezzanine board is only required in the monarch blade.
Removing the ICH mezzanine board
1. Power off the server and remove it from the enclosure (“Preparing the server blade for
servicing”).
2. Remove the access panel (“Removing the server blade access panel”).
3. Remove the ICH mezzanine card:
84 Removing and replacing components