Specifications

Removing and replacing the CPU baffle
Removing the CPU baffle
CAUTION: To prevent damage to the server blade, never power on a server blade without a
CPU baffle or processor in each processor socket. The CPU baffle is needed for proper system
cooling
CAUTION: Immediately install a CPU baffle in an empty CPU socket. To avoid damage to the
socket pins, the socket should never be uncovered for more than 5 seconds. If the socket is
damaged, the entire base blade must be replaced.
1. Power down the server blade and remove it from the server blade enclosure (“Preparing
the server blade for servicing”).
2. Remove the access panel (“Removing the server blade access panel”).
3. Pull the CPU baffle straight up and out.
Replacing the CPU baffle
1. Line the CPU baffle up with 4 load posts on each corner of the socket.
2. Guide the CPU baffle straight down into place.
Removing and replacing the CPU baffle 79