Specifications

CAUTION: During installation, after removing the protective cover from the heatsink:
• Do not touch or come into contact with the thermal interface material.
• Immediately install the heatsink.
CAUTION: To avoid damage to the server blade and processor, ensure the processor
heatsink's locking handle is fully back against the stops, rotated about 120° back. Also verify
that the plastic tabs on the processor's heatsink are pulled fully out before installation.
5. Install the heatsink over the load posts.
CAUTION: Do not lower the heatsink locking handle before pushing the plastic locking
tabs into place.
Installing additional components 29