Specifications

6. Remove the battery mounting bracket
Removing the BBWC battery
CAUTION: If you need to remove the cache module to transfer data, the battery must remain
connected so that the data is preserved. If you need to keep the battery connected to the cache
module, follow the steps for 512MB cache module removal (“Removing the 512MB cache module”)
instead of using this procedure.
1. Back up all data.
2. Close all applications.
3. Power down the server blade and remove it from the server blade enclosure (“Preparing
the server blade for servicing”).
4. Remove the access panel (“Removing the server blade access panel”).
5. Remove the DIMM baffle (“Removing the DIMM baffle”)
6. Lift up on the battery to remove it from the battery bracket.
7. Push the battery cable down and towards the rear of the server blade to push it out of the
battery bracket's C-hook.
112 HP Smart Array P700m/512 Controller