Specifications

C HP Smart Array P700m/512 Controller
IMPORTANT: The HP Smart Array P700m Controller for HP ProLiant Servers User Guide includes
a battery replacement procedure that uses the two driveless HDD trays included in the kit. This
procedure is not supported on the Integrity i2 server blades.
The HP Smart Array P700m/512 is a PCIe card supporting direct attach and shared SAS Storage.
It includes additional components that are covered in section.
Battery kit and other components
The battery kit includes the following:
5
P700m controller board
3
11.5 inch (29.2 cm) battery
cable
1
BBWC battery
2 6
Battery mounting bracket Mezzanine card blank
4
512 cache module
IMPORTANT: Integrity BL8X0c i2 products use the 452348-B21 battery kit, also called the HP
SA P-Series Low Profile Battery. Do not order or use the 383280-B21 battery kit option for Integrity
i2 server blades.
Battery mounting bracket parts
The BBWC battery mounts on a black metal battery mounting bracket installed inside the server
blade. The mounting bracket clips onto a mezzanine card in slot 1. If no card is used in slot 1,
the mezzanine card blank option must be installed for the bracket to clip on to.
For installing the bracket on to the server blade, the mounting bracket has:
• A mezzanine post loop that slides over the abutting mezzanine 2 post
• A thumbscrew clip that clips over the mezzanine 1 card or mezzanine blank thumbscrew
located at the rear of the blade
• A mezzanine foot that clips over the edge of the mezzanine 1 card or mezzanine blank that
is installed closest to the center of the blade
Battery kit and other components 105