Installation guide

StatusDescriptionItem
Green = Server blade is powered on
Amber = Standby (auxiliary power
available)*
Off = Off
Blade power LED9
Green flashing = iLO Active
Amber flashing = iLO failure
Off = No standby voltage
iLO HeartbeatNot shown (behind grill)
*If the Onboard Administrator denies power to the server blade, the server blade returns to
Standby mode.
SAS disk drive LEDs
There are two disk drives on the BL860c i2 Server Blade. They have identical LEDs that display
the drive status.
DescriptionItem
Fault/UID LED (amber/blue)1
Online LED (green)2
SAS hard drive LED combinations
NOTE: Predictive failure alerts only occur when the hard drive is connected to a Smart Array
controller.
InterpretationFault/UID LED (amber/blue)Online/activity LED (green)
The drive has failed, or a predictive
failure alert has been received for this
drive; it also has been selected by a
management application.
Alternating amber and blueOn, off, or flashing
The drive is operating normally, and
it has been selected by a management
application.
Steadily blueOn, off, or flashing
A predictive failure alert has been
received for this drive. Replace the
drive as soon as possible.
Amber, flashing regularly (1 Hz)On
The drive is online, but it is not active
currently.
OffOn
Overview 13