Specifications
Table Of Contents
- HP Integrity BL860c Server Blade User Service Guide
- Contents
- About This Document
- 1 Overview
- 2 General Site Preparation Guidelines
- 3 Installing the Server Blade Into the Enclosure
- Safety Information
- Installation Sequence and Checklist
- Unpacking and Inspecting the Server Blade
- Installing Additional Components
- Installing and Powering On the Server Blade
- Accessing the Integrated Lights Out 2 Management Processor
- Configuring the iLO 2 MP
- Accessing EFI or the OS from iLO 2 MP
- Server Blade to Enclosure Interface
- LAN / NIC Configuration
- Configuring the HP 2 Internal Port SAS Host Bus Adapter
- Verify and Install the Latest Firmware
- 4 Booting and Shutting Down the Operating System
- 5 Troubleshooting
- Methodology
- Troubleshooting Tools
- Errors and Error Logs
- Supported Configurations
- Troubleshooting Processors/Memory/SBA
- Enclosure Information
- Cooling Subsystem
- Troubleshooting Communications Modules
- Troubleshooting Management Subsystem
- Firmware
- Troubleshooting the Server Interface (System Console)
- Troubleshooting the Environment
- Reporting Your Problems to HP
- 6 Removing and Replacing Components
- Service Tools Required
- Removing and Replacing a Hot-Plug SAS Disk Drive
- Preparing the Server Blade for Servicing
- Removing and Replacing the Server Blade from the Enclosure
- Removing and Replacing the Server Blade Access Panel
- Removing and Replacing Internal Components
- Removing and Replacing DIMMs
- Removing and Replacing a Processor
- Removing and Replacing the SAS Backplane
- Removing and Replacing the Front Display Assembly
- Removing and Replacing the Server Battery
- Removing and Replacing the Mezzanine Cards
- Removing and Replacing a Cache Module
- Removing and Replacing the Low Profile Battery Backed Write Cache (BBWC) Battery
- Removing and Replacing the Trusted Platform Module
- Removing and Replacing the System Board
- A Parts Information
- B Server Upgrades
- C Utilities
- NVRAM Backup Utility
- Extensible Firmware Interface
- EFI/POSSE Commands
- Specifying Parameters
- Using the Boot Option Maintenance Menu
- Integrated Lights Out 2 Management Processor
- Index
DIMMs, 32, 115
front display assembly, 121
mezzanine card, 124
mezzanine cards, 33
NVRAM utility, 150
operating system with DVD drive, 66
operating system with HP-UX Ignite, 68
operating system with vMedia, 68
processor, 30, 117
SAS backplane, 120
SAS disk drives, 28
server battery, 123
server blade into enclosure, 38
system board, 144
TPM, 141
installing components, 29
installing the PCI expansion blade, 39
integrated Lights Out Management Processor see iLO 2
MP
integrated mirroring array see IM array
internal components, 113
internal health LED, 21, 93
L
LAN LEDs, 94
LEDs
boot process, 94
front panel, 20, 21, 91
internal health, 21, 93
LAN, 94
NICs, 21, 91, 93, 94
SAS disk drive, 21, 93
server health, 21, 92
unit identification (UID), 21, 88, 92
Linux
booting Red Hat Linux, 83
booting SuSE Linux, 84
shutting down, 85
Linux (Red Hat)
booting, 83
Linux (SuSE)
booting, 84
load order
DIMMs, 32
mezzanine cards, 34
processors, 103
lock-step mode, 18, 115
M
Management Processor see iLO 2 MP
memory see DIMMs see DIMMs
memory subsystem
overview, 17
mezzanine cards
installing, 33
load order, 34
removing, 123
replacing, 124
slot locations, 33
MPS optimization see PCIe MPS optimization
mptutil utility, 51
N
NIC LEDs, 21, 93
NICs
LED locations, 21
locations on enclosure, 51
NVRAM configuration utility, 49
NVRAM utility, 150
downloading, 150
installing, 150
O
obtaining the enclosure name using the RB command, 46
online support, 107
online support tools, 96
OpenVMS
booting, 76
booting (EFI boot manager), 76
shutting down, 77
operating system
installing with DVD drive, 66
installing with HP-UX Ignite, 68
installing with vMedia, 68
P
part numbers, 146
parts list, 146
path, determining for adapter
with info command, 170
PCI expansion blade, 17
PCI expansion blade, installing, 39
PCIe MPS optimization
enabling, 17
support, 16
PCIe MPS optimize
ioconfig command, 165
phone support, 107
point-of-load voltage rails
specifications, 19
ports
enclosure, 50
front panel, 20
rear panel, 23
power button, 22, 110
power subsystem
specifications, 19
powering off, server blade, 110
powering on
default, automatically, 40
server blade, 40
setting auto power on, 45
processor
installing, 30
load order, 103
overview, 19
removing, 116
replacing, 117
182 Index