Specifications
Table Of Contents
- HP Integrity BL860c Server Blade User Service Guide
- Contents
- About This Document
- 1 Overview
- 2 General Site Preparation Guidelines
- 3 Installing the Server Blade Into the Enclosure
- Safety Information
- Installation Sequence and Checklist
- Unpacking and Inspecting the Server Blade
- Installing Additional Components
- Installing and Powering On the Server Blade
- Accessing the Integrated Lights Out 2 Management Processor
- Configuring the iLO 2 MP
- Accessing EFI or the OS from iLO 2 MP
- Server Blade to Enclosure Interface
- LAN / NIC Configuration
- Configuring the HP 2 Internal Port SAS Host Bus Adapter
- Verify and Install the Latest Firmware
- 4 Booting and Shutting Down the Operating System
- 5 Troubleshooting
- Methodology
- Troubleshooting Tools
- Errors and Error Logs
- Supported Configurations
- Troubleshooting Processors/Memory/SBA
- Enclosure Information
- Cooling Subsystem
- Troubleshooting Communications Modules
- Troubleshooting Management Subsystem
- Firmware
- Troubleshooting the Server Interface (System Console)
- Troubleshooting the Environment
- Reporting Your Problems to HP
- 6 Removing and Replacing Components
- Service Tools Required
- Removing and Replacing a Hot-Plug SAS Disk Drive
- Preparing the Server Blade for Servicing
- Removing and Replacing the Server Blade from the Enclosure
- Removing and Replacing the Server Blade Access Panel
- Removing and Replacing Internal Components
- Removing and Replacing DIMMs
- Removing and Replacing a Processor
- Removing and Replacing the SAS Backplane
- Removing and Replacing the Front Display Assembly
- Removing and Replacing the Server Battery
- Removing and Replacing the Mezzanine Cards
- Removing and Replacing a Cache Module
- Removing and Replacing the Low Profile Battery Backed Write Cache (BBWC) Battery
- Removing and Replacing the Trusted Platform Module
- Removing and Replacing the System Board
- A Parts Information
- B Server Upgrades
- C Utilities
- NVRAM Backup Utility
- Extensible Firmware Interface
- EFI/POSSE Commands
- Specifying Parameters
- Using the Boot Option Maintenance Menu
- Integrated Lights Out 2 Management Processor
- Index
replacing, 114, 115
slot locations, 33, 114
disabling remote access, 48
disk drive backplane see SAS backplane see SAS
backplane
disk drive blank
removing, 28, 109
replacing, 110
disk drives see SAS disk drives
drvcfg command
EFI configurable components, displaying, 171
EFI driver handle, determining, 172
EFI Setup Utility, starting, 172
drvcfg utility, 53
adapter list screen, 54
adapter properties screen, 55
create new array screen, 57
manage array screen, 60
RAID properties screen, 56
select new array type screen, 57
view array screen, 59
E
EFI
accessing from iLO 2 MP, 48
boot manager, 49
capable devices
and controller handles, displaying, 170
commands, 53
configurable components, displaying, 171
driver handle, determining, 172
IM array, 53
saving configuration settings, 49
viewing VPD information, 53
EFI driver firmware update, 52
EFI Setup Utility
starting, 172
EFI/POSSE commands, 154
enclosure , 19, 25, 104
interconnect mapping, 50
interconnect modules, 51
LAN ports, 50
enclosure name, obtaining, 46
error logs, 98–101
expansion blade see PCI expansion blade
Extensible Firmware Interface
commands, 152
see EFI, 151
extraction lever location, 22
F
fault management, 97
field replaceable unit (FRU), 113, 146
firmware
BMC and MP, 105
downloading latest version, 64
installing latest version, 65
management subsystems, 105
troubleshooting, 105
verifying latest version, 64
forward progress log, 98
front display assembly
removing, 120
replacing, 121
front panel
LEDs, 20
port, 20
front panel LEDs, 91
G
gigabit LAN LEDs, 94
H
handle
controller, determining, 171
hard disk drive see SAS disk drive
HBA RISC firmware update, 52
HDD see SAS disk drive
HDD backplane see SAS backplane
HP 2 Internal Port SAS HBA controller, 51
HP-UX
booting in LVM maintenance mode, 74
booting in single-user mode, 73
fault management, 97
shutting down, 74
standard boot, 71
HP-UX Ignite, 49
I
I/O subsystem
overview, 16
iLO 2 MP , 179
accessing, 40
accessing EFI from, 48
accessing with DHCP, 40
accessing with RS-232, 42
configuring, 44
event log, 99
reset button location, 22
security, 45
IM array
activating, 61
configuring, 53
deleting, 61
synchronizing, 61
info command
adapter path, determining, 170
adapter slot number, determining, 170
init button location, 22
inspecting the shipping container, 27
installation checklist, 26
installation order
DIMMs, 103
mezzanine cards, 34
processors, 103
installing
BBWC battery, 132
cache module, 126
181