Specifications
Table Of Contents
- HP Integrity BL860c Server Blade User Service Guide
- Contents
- About This Document
- 1 Overview
- 2 General Site Preparation Guidelines
- 3 Installing the Server Blade Into the Enclosure
- Safety Information
- Installation Sequence and Checklist
- Unpacking and Inspecting the Server Blade
- Installing Additional Components
- Installing and Powering On the Server Blade
- Accessing the Integrated Lights Out 2 Management Processor
- Configuring the iLO 2 MP
- Accessing EFI or the OS from iLO 2 MP
- Server Blade to Enclosure Interface
- LAN / NIC Configuration
- Configuring the HP 2 Internal Port SAS Host Bus Adapter
- Verify and Install the Latest Firmware
- 4 Booting and Shutting Down the Operating System
- 5 Troubleshooting
- Methodology
- Troubleshooting Tools
- Errors and Error Logs
- Supported Configurations
- Troubleshooting Processors/Memory/SBA
- Enclosure Information
- Cooling Subsystem
- Troubleshooting Communications Modules
- Troubleshooting Management Subsystem
- Firmware
- Troubleshooting the Server Interface (System Console)
- Troubleshooting the Environment
- Reporting Your Problems to HP
- 6 Removing and Replacing Components
- Service Tools Required
- Removing and Replacing a Hot-Plug SAS Disk Drive
- Preparing the Server Blade for Servicing
- Removing and Replacing the Server Blade from the Enclosure
- Removing and Replacing the Server Blade Access Panel
- Removing and Replacing Internal Components
- Removing and Replacing DIMMs
- Removing and Replacing a Processor
- Removing and Replacing the SAS Backplane
- Removing and Replacing the Front Display Assembly
- Removing and Replacing the Server Battery
- Removing and Replacing the Mezzanine Cards
- Removing and Replacing a Cache Module
- Removing and Replacing the Low Profile Battery Backed Write Cache (BBWC) Battery
- Removing and Replacing the Trusted Platform Module
- Removing and Replacing the System Board
- A Parts Information
- B Server Upgrades
- C Utilities
- NVRAM Backup Utility
- Extensible Firmware Interface
- EFI/POSSE Commands
- Specifying Parameters
- Using the Boot Option Maintenance Menu
- Integrated Lights Out 2 Management Processor
- Index

Index
A
access panel
removing, 29, 112
replacing, 37, 112
accessing iLO 2 MP, 40
ACPI pathing, 104
adapter
path, determining with info command, 170
slot number, determining with info command, 170
adding Windows to the boot options list, 78
allowing remote access, 47
antistatic wrist strap, 26
autoboot, 69
B
battery see server battery
BBWC
cable routing, 128, 129, 137, 138
BBWC battery
removing, 130
replacing, 132
boot option
add, 175
change boot order, 175
delete, 175
manage bootnext setting, 176
set auto boot timeout, 176
boot option maintenance menu, 174
boot options list, 68
add HP-UX, 70
adding Linux, 82
adding Windows, 78
boot process LEDs, 94
booting
EFI boot manager, 151
from file, 174
HP-UX, 72
HP-UX (EFI boot manager), 71
HP-UX (LVM maintenance mode), 74
HP-UX in single-server mode, 73
OpenVMS, 75, 76
OpenVMS (EFI boot manager), 76
Red Hat Linux, 83
SuSE Linux, 84
Windows, 79
button, power, 22, 110
C
c-Class enclosure see enclosure
cable routing
BBWC, 128, 129, 137, 138
cache module
removing, 125
replacing, 126
cfggen utility, 61
AUTO command, 63
CREATE command, 63
HOTSPARE command, 63
parameters, 62
starting, 62
checking the inventory, 27
chip sparing, 32, 115
commands
devtree
controller handle, determining, 171
EFI-capable devices and controller handles,
displaying, 170
drvcfg
EFI configurable components, displaying, 171
EFI driver handle, determining, 172
EFI Setup Utility, starting, 172
info
adapter path, determining, 170
adapter slot number, determining, 170
component locations, 14
components list, 146
configurable components, EFI capable, displaying, 171
configure system boot options, 68
configuring system boot options, 68
confirming the packing slip, 27
console input device path, 178
console output device path, 177
controller handle, determining, 171
cooling subsystem, 104
core electronics complex
overview, 19
customer replaceable unit (CRU), 113, 146
D
damaged equipment, 27
devtree command
controller handle, determining, 171
EFI-capable devices and controller handles, displaying,
170
diagnostics, 95
general diagnostic tools, 97
IPMI event decoder, 97
offline, 96
online, 95
dimensions of server blade, 14
DIMMs
chip sparing, 32, 115
configuration, 115
installation order, 103, 114
installing, 32
load order, 32
lock-step mode, 18, 115
minimum and maximum capacity, 115
overview, 17
pairs, 115
removing, 114
180 Index