User's Manual

Example 5-4 Temporary Capacity Expiration Reminder
To: [e-mail]
Subject: Temporary Capacity Expiration Reminder
***************************************************************************
**** Failure to perform the following steps will result in the complex ****
**** attempting to deactivate cores on any booting partitions until ****
**** the complex is in compliance with the Instant Capacity contract. ****
***************************************************************************
This message is being sent to remind you that your Instant Capacity complex
(containing the partition krmt10b) has 3 cores currently consuming temporary
capacity (TiCAP) and that the temporary capacity balance at the current
consumption rate is projected to expire on or around:
12/31/08 16:00:00
You can view the current temporary capacity balance and consumption rate,
by using the icapstatus command.
To adjust the number of calendar days to receive the temporary capacity
warning before temporary capacity actually expires use: icapmodify -w
Before the temporary capacity balance runs out, you must perform one of the
following steps:
1. Purchase additional temporary capacity and apply the temporary
capacity codeword to the complex.
2. Deactivate cores until the number of inactive cores on
the complex matches the number of cores without usage rights,
reported by icapstatus.
3. Purchase additional core usage rights to match the number of cores
currently consuming temporary, and apply the Right to Use
codewords to the complex so that they can be permanently activated.
See the Instant Capacity user's guide at /usr/share/doc/icapUserGuide.pdf
for more information.
84 Temporary Instant Capacity