User's Manual

the managers and members of groups is established using SSL certificates that are supplied
by the GiCAP software.
Required Patches for HP-UX 11i v1
The following patches are required for Instant Capacity version 9.x on HP-UX 11i v1:
• PHKL_22987: S700_800 11.11 pstat() patch (Use only if your system runs
MeasureWare software)
• PHKL_23154: S700_800 11.11 dflush() patch
• PHKL_25218: S700_800 11.11 PDC Call retry, PDC_SCSI_PARMS, iCOD hang
fix
• PHKL_26232: S700_800 11.11 Psets Enablement patch,FSS iCOD patch
• PHKL_30197: S700_800 11.11 Psets & vPar, Reboot hangs, serial number
• PHCO_24396: S700_800 11.11 /etc/default/tz patch
• PHCO_24477: S700_800 11.11 sar (1M) patch
• PHCO_29832: S700_800 11.11 reboot(1M) patch
• PHCO_29833: S700_800 11.11 killall(1M) patch
IMPORTANT: For the most recent required patches, see the Instant Capacity Installation page
on the HP Software Depot (search for “B9073BA”):
http://www.hp.com/go/softwaredepot
HP-UX 11i v2 Requirements and Dependent Products
The following software is required for Instant Capacity version 9.x on HP-UX 11i v2:
• HP-UX 11i v2
• iCOD software bundle B9073BA (version 9.x) — On the 11i v2 Applications Software media,
or download the most recent version from the HP Software Depot at http://www.hp.com/
go/softwaredepot.
• The kernel configuration must include the diag2 module.
• WBEM B8465BA bundle (version A.02.05 or higher)
• nParProvider bundle (version B.23.01.06.02 or higher, available from the OE media)
• If you have a virtual partitioned environment, the Virtual Partitions (vPars) software (bundle
T1335BC) must be version A.04.01 or higher. vPars is available separately and is not included
with the OE.
• (GiCAP only) The CIM Server configuration property sslClientVerificationMode
must be set to a value of “optional” on all GiCAP Group Managers and on all OS instances
of all member systems. (The CIM Server may need to be restarted if the property was not
previously set to this value.) For details, see cimconfig(1M). Note that communication between
the managers and members of groups is established using SSL certificates that are supplied
by the GiCAP software.
NOTE: On HP-UX 11i v2 systems, updated firmware might be required by the nPar or Virtual
Partition software, as documented for these products.
Required Patches for HP-UX 11i v2
The following patches are required for Instant Capacity version 9.x on HP-UX 11i v2:
• PHKL_33752: S700_800 11.23 Itanium 2 Processor speed reporting patch
required only for IA systems
• PHCO_34721: killall(1M) patch
• PHKL_35174: _CS_PARTITION_IDENT patch required for GiCAP on rx8640 and rx7640
systems
Instant Capacity Requirements 29