Virtual Connect Enterprise Manager 7.1 CLI Guide

add enet-connection
The -add enet-connection command adds a new Ethernet network connection to an existing
server profile in the VC domain.
NOTE: The maximum number of Ethernet connections that can be added to a server profile
depends on the Virtual Connect firmware version. For more information, see the HP Virtual Connect
Enterprise Manager 7.1 User Guide available at: http://www.hp.com/go/vcem/.
Syntax
-add enet-connection –profilename <profileName>
[-network <NetworkName>]
[–pxe <enabled|disabled|usebios>]
[–speedtype <auto|preferred|custom|disabled>]
[–speed <speed>]
Parameters
Table 10 Parameter descriptions for -add enet-connection
OptionalRequiredDescriptionParameter
xSpecifies the name of an
existing profile to which the
connection is added.
-profilename
xSpecifies the name of an
existing network to associate
-network
with the connection. If the
network name is not
specified or is set to
unassigned, the network
will be left unassigned and
can be assigned later.
xEnables or disables Preboot
Execution Environment (PXE)
-pxe
on the network connection.
If this value is not specified,
the default will be usebios.
NOTE: Only one
connection can have PXE
enabled per profile.
add enet-connection 31