Managing HP Servers through Firewalls with Insight Management 7.0

23
available one is used by HP Smart Update
Manager to pass information between processes
on the local workstation where HP Smart Update
Manager is executed, and the next available one
is used to receive messages from remote servers.
Y
62000 and
62001
These ports (or the first two ports available after
62000) are used for internal process
communications on the system running HPSUM on
each target
Y 62286
This port is the default for some internal
communications. It is the listening on the remote
side if there is no conflict. If a conflict occurs, the
next available one is used.
Y Y 7 ICMP
ICMP Echo Reply/Request is used to determine if
target devices have successfully rebooted or not
1
All ports are for TCP and UDP.
2
The CMS will normally have all managed system ports open, as the CMS is a managed system itself. Firewalls may be
configured to block these ports if the CMS is not to be managed from another system.
HP Insight Control for VCenter Ports
This section is based on the assumption that HP Insight Control for VCenter is behind the firewall with
the CMS.
Table 7 Ports for HP Insight Control for VCenter
CMS Managed
System
Port Protocol
1
Description
In
2
Out In Out
Y 80 TCP Discovery
Y Y 161 SNMP (UDP) SNMP Agent
Y 162
SNMP Trap
(UDP)
Trap listener
Y 443 SSL Communication with iLO, HPOA, HPVCM
Y Y Y 50028 HTTPS
Common Services default WBEM indications
listening port
Y Y 50025 HTTPS
Y Y 50026 TCP/Block Common Services default web port
Y Y 50027 Common Services secondary web port
Y Y 50029
Common Services secondary WBEM
indications listening web port
Y Y 5989 HTTPS
HTTPS WBEM, WBEM Service on EVA
Command View Server
Y 5990 HTTPS
1
All ports are for TCP and UDP.
2
The CMS will normally have all managed system ports open, as the CMS is a managed system itself. Firewalls may be
configured to block these ports if the CMS is not to be managed from another system.