Installing and upgrading HP Insight Management 7.2 on Windows Server 2012 Failover Clusters

White paper | HP Insight Management 7.2
54 | March 2013
than the name of the server that owns the virtual group, a security certificate for
Systems Insight Manager is sent to your browser. If your browser is configured to warn
about invalid site certificates, a security alert displays when connecting to the Systems
Insight Manager virtual server (which was created earlier in this white paper). This alert
indicates that the server name to which you have connected does not match the name
on the certificate. This is because the name on the certificate is the name of the
secondary system of the cluster and not that of the virtual server. This warning can be
ignored.
To learn more about the browser security alert, see the HP Systems Insight Manager
User Guide.
4. Sign in to Systems Insight Manager with the SQL/IM Administrator account. After you
have successfully logged in, the Systems Insight Manager home appears.
5. In Systems Insight Manager, navigate to the All Systems page.
a. A system with the name of the Failover Cluster virtual server, in this white
paper CMS-C16-CLUSTER, should be present.
b. Click this name in the System Name column and verify that Cluster Monitor is
invoked.
c. If Cluster Monitor does not start successfully, shut down the secondary
system. Restart the primary system; after the primary system is back online,
power on the secondary system and wait for it to come online. Log in to the
primary system and go back to Step 1.
6. Navigate to the All Systems page.
a. In the leftmost checkboxes, select all systems except the Failover Cluster
virtual server, in this white paper CMS-C16-CLUSTER.
b. Click Delete.
7. In Systems Insight Manager, navigate to Options  Protocol Settings  WMI
Mapper Proxy. The WMI Mapper Proxy page appears. The host displayed should be the
name of the secondary node.
a. Check the box to select the current host and click Delete.
b. Click New.
c. If WMI Mapper was installed by the Insight Installer, then enter the FQDN of
the Systems Insight Manager virtual server name (in this white paper CMS-
C16-MATRIX).
d. If WMI Mapper was not installed by the Insight Installer, then enter the FQDN
of the host that is providing this service. (This host will not be part of the
cluster.)
e. Verify the port number and adjust as needed, and then click OK.
8. Navigate to Options  Protocol Settings  Global Protocol Settings. The Global
Protocol Settings page appears.
a. Click the Global Credentials link under SNMP. The Global Credentials page
appears.