HP Virtual Connect Enterprise Manager 6.3.1 CLI Guide

add fcoe-connection
The -add fcoe-connection command adds a new FCoE connection to a server profile
Syntax
-add fcoe-connection –profilename <profileName>
-connectionbay <ConnectionBay>
[-fabric <FabricName>]
[-speedtype <1Gb|2Gb|4Gb|8Gb|custom|disabled>]
[-customspeed <100 — 10000>]
Parameters
Table 16 Parameter descriptions for -add fcoe-connection
OptionalRequiredDescriptionParameter
xThe name of an existing
profile to add the new
connection to.
-profilename
xThe bay for the connection-connectionbay
xThe name of an existing
fabric to associate with the
-fabric
connection. If the fabric
name is not specified, then
the connection will be
marked as unassigned
but associated with a
specific bay.
xThe port speed of the
connection port. Valid values
-speedtype
include auto, 1Gb, 2Gb,
4Gb, 8Gb, custom, and
disabled. The default port
speed is auto.
x
NOTE: The parameter
-customspeed is required
if speed type is custom.
The port speed of the
connection port. Valid values
include values between 100
Mb and 10 Gb. The
acceptable value is between
100 to 10000 Mb/s.
-customspeed
Output
The function returns the result of the add operation or a jobid if –nb is specified.
Examples
• Add a new FCoE connection to a profile:
vcemcli -add fcoe-connection MyNewProfile -connectionbay 3 –fabric
SAN_5
• Add a new FCoE connection and configure the port speed:
vcemcli -add fcoe-connection MyNewProfile -connectionbay 3 –fabric
SomeFabric -speedtype 4Gb
36 Using VCEM commands