HP Virtual Connect Enterprise Manager 6.3.1 CLI Guide
Table Of Contents
- HP Insight Software Virtual Connect Enterprise Manager
- Contents
- 1 Getting Started
- 2 Using VCEMCLI
- 3 Using VCEM commands
- add profile
- set profile
- assign profile
- export profiles
- unassign profile
- add enet-connection
- set enet-connection
- remove enet-connection
- add fc-connection
- set fc-connection
- remove fc-connection
- add fcoe-connection
- set fcoe-connection
- remove fcoe-connection
- add iscsi-connection
- set iscsi-connection
- remove iscsi-connection
- set iscsi-boot-param
- remove iscsi-boot-param
- add server-port-map
- set server-port-map
- remove server-port-map
- poweroff devicebay
- poweron devicebay
- show power-status
- show job
- show version
- show vcem-status
- startvcdmaint
- cancelvcdmaint
- completevcdmaint
- 4 Error messages
- 5 Troubleshooting VCEMCLI
- VCEMCLI calls result in access denied errors
- VCEMCLI calls result in errors for invalid leading character or invalid characters
- VCEMCLI calls result in 404 errors
- API timeouts
- High CPU usage on the CMS server while running a VCEMCLI client
- Job reports failed status
- Completed with warning job status
- Unable to assign a profile to a Domain Group
- VC Domain reports Configuration Mismatch status
- VC Domain reports Expired License status
- Error on database operation occurs
- Failed to execute VCEM operation because VC firmware not supported
- Creating a server profile fails
- Server profile edit operation fails when target server is powered on
- Server profile job completed with success but changes have not occurred
- After a server profile assignment, some connections defined in the server profile are not functional
- Commands -add profile or -set profile error messages
- Command -add profile error messages
- Additional Troubleshooting Information and tools
- 6 Support and other resources
- Index
set enet-connection
The -set enet-connection command modifies an Ethernet connection of a server profile.
Syntax
-set enet-connection –profilename <profileName> -portnumber <Port>
[-network <NetworkName>]
[–pxe <enabled|disabled|usebios>]
[–speedtype <auto|preferred|custom>]
[–speed <speed>]
Parameters
Table 9 Parameter descriptions for -set enet-connection
OptionalRequiredDescriptionParameter
xThe name of the server
profile that contains the
connection to modify.
-profileName
xThe port number of the
connection being modified.
-portnumber
xThe name of the Ethernet
network to associate with the
-network
connection. Applies to
Ethernet Network
connections only.
xEnables or disables PXE on
a connection. Valid values
-pxe
are enabled, disabled,
and usebios.
NOTE: Only one
connection can have PXE
enabled per profile.
set enet-connection 27