HP Insight Management 7.3 DMT White Paper

iv. Verify the port number and adjust as needed.

v. Click OK.

b. If WMI Mapper was installed by the Insight Management Installer on the target

cluster, then follow the steps to configure the WMI Mapper proxy.

i. Check the box to select the current host and click Delete.

ii. Click New.

iii. Enter the FQDN of the Systems Insight Manager virtual server name in

the target cluster.

iv. Verify the port number and adjust as needed.

v. Click OK.

Note: After import, the target CMS will have the source CMS WMI mapper proxy data. If you want to

use the WMI mapper proxy data that is different from the source machine, then you must update the

WMI mapper proxy data manually (wbemportlist.xml).

5. Navigate to OptionsDiscovery. The Systems Insight Manager discovery page appears.

a. Click the link for Configure general settings under For all automatic discoveries.

b. In the list box named Ping exclusion ranges, templates and/or hosts files: add

the following items:

• The Microsoft SQL Server 2008 virtual server IP address of the target

cluster (a public network IP address).

• The Microsoft Distributed Transaction Coordinator virtual server IP

address of the target cluster (a public network IP address).

• The private network IP address of the target cluster primary node.

• The private network IP address of the target cluster secondary node.

HP recommends that the balance of the private network IP address range

also be entered. The private network exists to facilitate the cluster

heartbeat. The private network IP address range is generally not of any

use and must be excluded to prevent possible confusion.

c. Click OK.

6. The main HP SIM discovery page appears once more. At the bottom is a list of discovery

tasks that contains the System Automatic Discovery task. Do not run this task. Select it

and click Edit…. In the Ping inclusion ranges… list box to remove all reference to the

target cluster private network IP Addresses. Click Save.

7. Create or update the discovery task for the Systems Insight Manager virtual server.

a. If the source CMS is a Cluster CMS and a Discover HP SIM virtual server

discovery task is already configured:

i. Select and edit the “Discover HP SIM virtual server” discovery task.