Backing up and Restoring HP Insight Management 7.0 Central Management Server (Windows)

74
Matrix recovery management section
During this final section, the restored HP Matrix recovery management database is
updated. To reduce the effort required to recreate the post-backup recovery
management configuration changes, you are given the opportunity to use an exported
recovery management configuration file to replace the existing configuration in the
restored database.
+----------------------------+
| Section 5 of 5 |
| Matrix recovery management |
+----------------------------+
Synchronizes Matrix recovery management state with underlying logical servers
and, optionally, with a saved Matrix recovery management configuration file
**** Analysis: Matrix recovery management configuration sync ****
**** Section 5 of 5, phase 1 of 1 ****
Analyzes each Matrix recovery management Recovery Group to ensure that the
associated Logical Server is present in the LSM database. An Matrix recovery
management export configuration file may be provided to recover post-backup
configuration changes.
You are recommended to supply an Matrix recovery management export file for
synchronization. This file should contain the latest Matrix recovery management
configuration changes.
You may also proceed with a not fully up-to-date export file or with the state
restored from a backup.You must then review the Matrix recovery management
configuration at the end of mxsync execution and make the necessary additional
changes.
>>> Do you want to use an exported configuration file? If yes, please place the
file at the following location: C:\Program Files\HP\Insight
Recovery\conf\mxsync_config, and then type y. If you prefer to use the
existing database configuration, type n (Y/N): y
Determining starting configuration for Matrix recovery management
synchronization.
This may take a few minutes...
Applying synchronized configuration..................................[ACTION]
ADVISORY: Mxsync has written out a file of potential fix-ups for the
Matrix recovery management configuration, corresponding to
the actions listed above as requiring input, at C:\Program
Files\HP\Recovery Management\conf\mxsync_fixup.txt. Please
edit this file, following the contained instructions, to
specify if you want to modify the recovery groups,
Activated at Local Site field, and/or delete one or more
Logical Servers/Recovery Groups.
Analysis summary:
1 check performed
1 action needed
0 actions require input
1 advisory
0 errors
Analysis completed successfully. You can choose to execute synchronization
actions now, or stop the synchronization process. If the synchronization
process is stopped, it can be restarted later.