Software Owner's manual

Test Log tab (HP Insight Diagnostics Offline Edition only)
IMPORTANT: This feature is available only in HP Insight Diagnostics Offline Edition.
Detailed test results of offline testing appear in the Test Log on the Log tab.
The Test Log displays the following information:
The status indicator for each test
The completed tests
The number of times the test was run
The number of times the test failed
The time it took to complete the test
The date that this same test was last completed
To clear the content of the Test Log, click Clear Logs. Make sure the Clear Diagnosis Log option is
selected, and then click OK.
To save the Test Log to an HTML file onto a storage device such as a USB disk or diskette, click
Save Logs.
Figure 17 Test Log
Error Log tab
The Error Log tab displays the following diagnostic information for failed devices:
The device and test that failed
A description of and details about the error
The recommended repair action for the failed hardware issue
The failed count, the number of times the test has failed
28 Using HP Insight Diagnostics